Archive for October, 2009

Happy Halloween!

It’s Halloween, and I finished my costume just in time! I finished making Sakura’s gloves last night and styled her wig just today.

sakura_accessories_01

The gloves were made with stretch jersey covered around craft foam. The wrists come together with velcro. The headband is twill that I had laying around. The length is about 80in.

The wig is New Look’s Maxine wig. I thinned it out, cut in extra bangs, and cut the whole thing shorter. I also straightened it with hot water, which I debated whether I should do. I normally let it dry for over a day, but I didn’t have that kind of time today! So, I let it sit there for a few hours before using a hair dryer on low to dry the rest.

Here are pictures of the whole costume!

sakura_02

sakura_03

Main parts done

I’m done with the clothing part of Sakura’s costume!

sakura_progress_02

The sleeves took me a while. I messed up 3 times just trying to get them in. I did try to make them poofy with darts, but maybe I didn’t do enough or the fabric just doesn’t hold up.

The yellow scarf took more fabric than I thought it would. I measured it to be 46in at first, but I ended up needing almost 60in to get that length. There are just 2 small stitches where the 2 sides meet near the shirt opening, just to keep it there. Other than that, it’s not really sewed to the shirt.

The red shirt is a turtleneck crop top which was originally long sleeves and the collar folded over the front. I cut the sleeves short, and I also cut open the collar and folded it inwards instead. I might expand the elastic at the bottom since it feels a little tight.

Left to do!
- make fighting gloves
- style wig

Sakura’s sailor collar

I’m almost done with Sakura’s shirt! The sleeves are giving me trouble though. I’m at my 3rd attempt now to get them on correctly ^^;; But, in the mean time, here’s how I made her sailor collar.

I started by drafting a pattern…

sakura_collar_01

Then tracing it on two layers of fabric.

sakura_collar_02

Cut it out, leaving seam allowance. Took the 2 layers and sewed them together where the line is drawn. (I didn’t sew the inner part though. You need to leave an opening.)

sakura_collar_03

Flipped the collar inside out and added white bias tape.

sakura_collar_04

Sewed it to the shirt, and that was it! I still need to add the yellow scarf, but I’ll worry about that last.

sakura_collar_05

←Older